3.
When Set on time shows on the
display press OK or SELECT
4.
Press or to set the hour
time and press OK or SELECT.
5.
Press or to set the minute
time and then press OK or SELECT
•
The hour and minute set above is the
time to turn on the unit
6.
When Set mode shows on the
display, press OK or SELECT
7.
Press or to select the timer
sound source and then press OK or
SELECT
•
Timer sound sources: FM, CD, USB
CARD or iPod
®
8.
When Set day shows on the display,
press OK or SELECT
9.
Press or to select timer
frequency then press OK or SELECT
•
Alarm
frequencies:
weekday or weekend
10. When Set off time shows on the
display press OK or SELECT
11. Press or to set the hour
time and then press OK or SELECT
12. Press or to set the minute
time and then press OK or SELECT
•
The hour and minute set above is the
time to turn off the unit
•
The timer is now set, press TIMER
to confirm the timer settings
•
When the timer is activated a timer
icon
corner of the display.
To deactivate the timer:
Press TIMER and then or to
select Disable. The timer icon
disappear from the display.
Sleep function
The unit includes a programmable sleep
function to play the unit for a set length of
time before turning off automatically.
To use the sleep function:
1.
Press STANDBY to turn on the unit
and select a sound source to play
2.
Press SLEEP on the remote control.
The display will show Sleep time
15 min.
3.
Press SLEEP repeatedly to select a
desirable length of time (15, 30, 45,
60, 90 and off) before the unit turns
off automatically.
•
Select OFF if you want to cancel
using this function.
once,
daily,
•
The display will return to the previous
display after a few seconds. The
sleep function is now set. A small
clock icon
lower right corner of the display with
the remaining length of time next to
it.
•
For CD mode, the unit will only
operate until the CD ends. If you set
14
will show at the lower left
will show at the
will