König Electronic HAV-MCS54 Manual De Uso página 24

4. Press and hold  or  to scan
backward or forward within the same
file. Release the button to resume to
normal playback.
5. Press STOP to stop the playback
Other playback features:
• Repeat playback
• Random playback
• Program playback (up to 99 files)
The operation procedures are the same
as MP3/WMA disc playback. Refer to
page 19-21 for details.
To disconnect the USB device or SD/
MMC card:
Simply unplug the USB device from the
connector or remove the SD/MMC card
from the card slot.
Auxiliary input
The unit includes an AUX In jack to let
you connect external audio equipment
(e.g. mp3 player, audio outputs from DVD
or VCR, cassette player) and listen to
the sound from the external equipment
through the speakers of this unit.
To connect an external audio equipment:
Connect the audio
headphone jack of the external audio
equipment to the AUX jack at the back of
this unit. You may permanently connect
the external audio equipment to the unit
It is not necessary to disconnect the
equipment in order to listen to other sound
sources from this unit.
external audio
equipment
To access the AUX mode:
Press FUNCTION repeatedly on the main
unit until AUX mode is selected, or press
AUX on the remote control.
To listen to external audio equipment:
1.
2.
•
•
Settings and Info
System Setup
Several setting options are available
Group A
•
•
Group B
•
•
•
To access the options in Group A:
1.
2.
output jack or
3.
4.
To access the options in Group B:
1.
2.
24
In AUX mode, turn on your external
audio equipment and start playback.
Adjust the volume of your external
audio equipment to mid-range and
adjust the master volume on this
unit.
Do not turn the volume of the external
audio equipment too high as this may
affect the sound quality
For other playback
control them on your external audio
equipment
Internet setup
Software reset
Set clock
Set alarm timer
System reset
Press MENU in iRadio, FM or M.
Player mode
Press  or  to select Main menu
and then press OK or SELECT.
Press  or  to select System setup
and then press OK or SELECT
Press  or  to select a desired menu
item and then press OK or SELECT
Press STANDBY switch the system
into standby mode
Press  or  to select an option
and then press OK or SELECT
operations,