MSA Latchways PRD Manual Del Usuario página 5

Latchways PRD label product markings
B
Descent device label (see page 220/221)
C
Serial number label (see page 221)
D
Backpack label (see page 221)
E
Harness label (see page 221)
Model
1
Manufacturer
2
Applicable standards
3
ATEX
4
Read the manual
5
Max descent height
6
User weight
7
Operating temperature
8
Operating instructions:
9
1. Check before each use and follow the manufacturer's instructions.
2. Avoid descending into electrical, thermal or chemical sources or other hazards.
3. Check the ground below is clear of obstructions and sharp edges and a safe landing is possible.
4. Open flap on right shoulder.
5. Pull cord sharply.
6. Bend knees and prepare for landing.
Latchways PRD user instructions
The User shall read and understand the user instructions before use and shall follow
the user instructions when using the equipment. These instuctions and corresponding
inspection records shall be retained for future reference and should be used as part of an
employee training programme.
It is essential for the safety of the user that if the Latchways PRD is resold outside the original
country of destination, the reseller shall provide instructions for use, maintenance, periodic
examination and repair in the language of the country in which the device will be used.
Before use it shall be ensured that the serial number of the harness and the descent device
match those listed on the certificate of conformity and equipment record sheet.
Operating instructions
9
Serial number
10
Notified body
11
Next examination date
12
Date of manufacture
13
Part number
14
Designated attachment
15
point (Figure 17)
Size
16
Do not use
17
Latest disposal date
18
Harness materials
19
Examine at least annually
20
No modifications or repairs
21
For single user
22
For single descent
23
EN
5