Installation Of The Batteries Into The Machine; Connection Of The Battery Connector; Connection Of The Battery Charger - COMAC OMNIA 26 Manual De Uso

4. 4. 4. 4.

INSTALLATION OF THE BATTERIES INTO THE MACHINE

INSTALLATION OF THE BATTERIES INTO THE MACHINE INSTALLATION OF THE BATTERIES INTO THE MACHINE INSTALLATION OF THE BATTERIES INTO THE MACHINE
The batteries are fitted in the appropriate compartment under the solution tank and must
be handled by using appropriate lifting equipment suitable both for the weight and for
the coupler system. They must moreover satisfy the requirements quoted in the
Specification CEI 21-5. Dimensions of the battery compartment: 436 x 614 x H510 mm.
ATTTENTION! ATTTENTION! For maintenance and daily recharge of the batteries, it
ATTTENTION! ATTTENTION!
is necessary to follow strictly all the indications given from the
constructor or from his dealer.
Specialized staff must carry out all the installation and maintenance
operations.
For the battery installation it is necessary to:
1. Make sure that the solution tank is completely empty
2. Lift the solution tank completely
3. Move the coupler prop onto the outermost hole (1) maintaining the tank in a vertical
position
4. After the installation of the batteries hook up again the prop into its original position
ATTTENTION! In order to avoid irreparable damages to the solution ATTTENTION! ATTTENTION! ATTTENTION!
tank and/or to the recovery tank, keep the solution tank lifted in
vertical position when the prop is being uncoupled from its support.
5. 5. 5. 5.

CONNECTION OF THE BATTERY CONNECTOR

CONNECTION OF THE BATTERY CONNECTOR CONNECTION OF THE BATTERY CONNECTOR CONNECTION OF THE BATTERY CONNECTOR
The battery connector (2) is placed under the solution tank and has to be connected to
the connector of the machine (1).
6. 6. 6. 6.

CONNECTION OF THE BATTERY CHARGER

CONNECTION OF THE BATTERY CHARGER CONNECTION OF THE BATTERY CHARGER CONNECTION OF THE BATTERY CHARGER
The coupling connector of the battery charger is delivered in the bag where this
instruction booklet is found and must be assembled on the battery charger cables
following the suitable instructions
ATTENTION! This operation has to be carried out by specialized staff. ATTENTION! ATTENTION! ATTENTION!
A wrong or incomplete cable connection to the connector can cause
serious damages to persons or things
MACHINE PREPARATION MACHINE PREPARATION
MACHINE PREPARATION MACHINE PREPARATION
33