ABB Totalflow NGC8206 Manual Del Usuario página 299

TERM
S/N
S1
S2
S3
S4
Saddle
Sample Loop
Saturated BTU
Saturated Hydrocarbons
Save
Savitsky-Golay
Smoothing
SCADA
Scf
Schematic
SCM
Scroll
SD Card
SDRIVE
Selectable Units
Self-Calibrating
Semiconductor
2103650-001 – rev. AB
Serial Number. The whole Serial Number is made up of a prefix of 5
digits and the suffix, a 10 digit configuration number.
Sample Line 1 (located on NGC8200 series Feed-Through Assembly).
Sample Line 2 (located on NGC8200 series Feed-Through Assembly).
Sample Line 3 (located on NGC8200 series Feed-Through Assembly).
Sample Line 4 (located on NGC8200 series Feed-Through Assembly).
A fitted plate held in place by clamps, straps, heat fusion, or welding
over a hole punched or drilled in a gas main to which a branch line or
service line connection is made. The saddle also may serve as a
reinforcing member for repair.
A tube with a given volume used in conjunction with a valve for
measuring and holding the sample gas before pushing it into the
chromatograph column.
The heating value of natural gas that is saturated with water vapor.
Hydrocarbons that contain only single bonds. They are also called
Alkanes or paraffin hydrocarbons.
This refers to a Totalflow procedure in which all the Station or
Configuration files are copied from the RDRIVE or the SDRIVE, to a file
created on a laptop.
Digital Signal Smoothing. A special class of a digital signal processing
filter. Specifically determines the coefficients that are used for signal
processing.
See Supervisory Control and Data Acquisition
Abbreviation for one standard cubic foot, a measurement of a gas
volume at a contractual, regulatory or standard specified temperature
and pressure.
Another name for a circuit diagram.
Acronym for Sample Conditioning Module.
To move all or part of the screen material up to down, left or right, to
allow new information to appear.
Secure Digital Card.
2
Totalflow's Serial E PROM solid state memory chip, located on the
Main Board (volatile memory, affected by a cold start), used to store
configuration or station files.
Selectable measurement units for various international and specialized
application needs.
A property of a DAQ board that has an extremely stable onboard
reference and calibrates its own A/D and D/A circuits without manual
adjustments by the user.
Material that is nether a conductor nor insulator. Its properties can be
altered by a control voltage.
DEFINITION
Página B–53