Before First Use; Using The Machine - ECG ESP 20101 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 123
• Coffee powder shall not exceed the MAX scale of the filter
cup.
• The filter holder must be fully locked from the left to the right
to be seated securely in the bracket and point forwards at
a 90° angle.
• Do not remove the filter holder when brewing coffee.
• Do not brew coffee in steam mode.
• Do not brew coffee immediately after steam. Need to boil
a small cup of water to cool down.
• After boiling coffee, boil a cup of water to clean the remaining
coffee powder at the coffee outlet.

BEFORE FIRST USE

Remove all packaging material from the appliance and dispose of it properly. Make sure the delivery is
complete.
Wash the water tank, lever, filters, scoop, drip tray and milk frothing attachment in warm water with a little
dishwashing detergent, rinse thoroughly and dry.
Wipe the appliance body, nozzle and drip tray with a  damp cloth or a  soft sponge with a  little ordinary
dishwashing liquid and dry thoroughly with a towel or paper towel. Do not use aggressive abrasive cleaners
or scourers.
Do not immerse the device in water.

USING THE MACHINE

Fill the water tank. The amount of water must not exceed the "MAX" mark, but make sure that the level exceeds
the "MIN" mark. Make sure that the tank lid is closed.
Note: The water tank is removable. You can remove it from the appliance, fill it with water directly from the tap
and put it back. Make sure the container is properly seated in the machine.
Insert the small or large filter in the filter cup. Make sure that the small tab in the filter fits in the notch of the
filter cup. When you turn the filter in the filter cup you make sure that the filter would not fall out.
NOTICE: The lever with the metal cup must be properly fastened in the steam head. Turn the lever anti-
clockwise so that it faces the front of the machine at 90° angle.
HELPFUL TIPS
GB
63

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido