Hitachi FDV16VB Instrucciones De Manejo página 8

English
3. Maintenance of the motor
The motor unit winding is very "heart" of the power
tool. Exercise due care to ensure the winding does
not become damaged and/or wet oil or water.
4. Servicing
Consult an authorized Service Center in the event
of power tool failure.
NOTE
Due to HITACHI's continuing program of research an
development, the specifications herein are subject to
change without prior notice.
IMPORTANT
Correct connection of the plug
The wires of the main lead are coloured in accordance
with the following code:
Blue: –Neutral
Brown: –Live
As the colours of the wires in the main lead of this tool
may not correspond with the coloured markings identi-
fying the terminals in your plug proceed as follows:
The wire coloured blue must be connected to the termi-
nal marked with the letter N or coloured black. The wire
coloured brown must be connected to the terminal
marked with the letter L or coloured red.
Neither core must be connected to the earth terminal.
NOTE
This requirement is provided according to BRITISH STAN-
DARD 2769: 1984.
Therefore, the letter code and colour code may not be
applicable to other markets except the United Kingdom.
Information concerning airborne noise and vibration
The measured values were determined according to
EN 60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 108 dB(A)
Measured A-weighted sound pressure level: 97 dB(A)
Uncertainty KpA: 3 dB(A)
Wear ear protection.
The typical weighted root mean square acceleration value:
2
17 m/s .
6