Checking the remaining
battery charge
A remaining charge indicator appears on
the upper left of the LCD screen.
High
Notes
It takes about one minute until the correct
remaining charge indicator appears.
The remaining charge indicator may not be
correct under certain circumstances.
If the NP-FD1 battery pack (not supplied) is
used, the minute display is also shown after
the remaining charge indicator.
Battery capacity decreases over time and
through repeated use. When the operating
time per charge decreases markedly, the
battery pack needs to be replaced. Purchase a
new battery pack.
To remove the battery pack
Note
Never remove the battery pack/"Memory
Stick Duo" (not supplied) when the access
lamp is lit. This may cause damage to data.
Recording media that you can
use
The camera has an approximately 4GB
internal memory that lets you record
many images even when a "Memory
Stick Duo" (not supplied) is not inserted.
When a "Memory Stick Duo" is inserted,
images are recorded on the "Memory
Stick Duo".
16
Low
Battery eject
lever
Access lamp
Slide the battery eject
lever. Be sure not to drop
the battery pack.
"Memory Stick Duo"
You can also use a "Memory Stick PRO Duo"
or "Memory Stick PRO-HG Duo" with the
camera.
For details on the number of images/time
that can be recorded, see page 32. Other types
of "Memory Stick" or memory card are not
compatible with the camera.
"Memory Stick"
You cannot use a "Memory Stick" with the
camera.
Note
You cannot transfer images between the
internal memory and a "Memory Stick Duo"
inserted in the camera.
To insert the "Memory Stick
Duo" (not supplied)
Open the cover, then insert the "Memory
Stick Duo".
To remove the "Memory Stick Duo", push
the "Memory Stick Duo" in once.
With the terminal
side facing the
lens, insert the
"Memory Stick
Duo" until it clicks
into place.