Moving And Storage - Tunturi Classic RUN 1.0 Manual Del Usuario

NOTE! Don't push in the safety switch before
unplugging the machine's power cord
If you leave the treadmill plugged in after turning off the
console, there will still be current running to the console.
This treadmill is equipped with a safety control program
that will automatically shut down the machine after six
hours of no use. In the event of an automatic shut down,
please follow the procedure below to restart the treadmill:
A. Unplug the power cord form the machine's socket.
Replug the power cord into the machine's socket to
restart the machine.
Run1.0_MANUAL_120914.indd 8
MOVING AND
STORAGE
After assembly is complete, you may fold the machine
into the upright position for storage. To hold the machine,
raise the desk until it locks in to position.
deck locking into position. This is to ensure the deck is
locked in place and will not drop back down.
before folding the deck. If the elevation is not at 0, folding
will damage the mechanism.
Safety switch
ON/OFF
Power cord
First to step on the pedal, second push the frame toward
the console then leave the deck lower to the floor.
feature to help the deck lower slowly. Please make sure
there are no children or other things under the deck when
you lower it.
8
NOTE! Make sure you hear the click sound of the
NOTE! Make sure the treadmill's elevation is at 0
NOTE! This machine has a built-in safety unfolding
9/14/2012 6:09:49 PM