Annual Maintenance - Weber GO-ANYWHERE Manual Del Proprietário

KEEPING YOUR
WEBER GAS GRILL IN
®
TIP-TOP SHAPE
m DANGER
Failure to correct any problems described
on this page may result in a fire, which can
cause serious bodily injury or death, and
cause damage to property.
10
WWW.WEBER.COM
®

ANNUAL MAINTENANCE

To keep your Weber gas grill performing as safely and
®
efficiently as on day one, we strongly recommend that you
inspect and clean the spider/insect screen and burner
tube at least once a year. Below is important information
about these two areas of the grill that should undergo
annual maintenance.
If you observe an incorrect flame pattern or blocked
burner port, proceed to the "BURNER TUBE CLEANING
OR REPLACEMENT" instructions on the following page.
BURNER FLAME PATTERN
The burner tube in your Weber gas grill was factory set
®
for the correct air and gas mixture. The correct flame
pattern is shown in illustration and described below:
• Burner tube (1)
Tips occasionally flicker yellow (2)
•
• Light blue (3)
Dark blue (4)
•
Check burner flame pattern. If the flames do not match
the above description, it could be an indication that the
spider/insect screen has become dirty or blocked.
WEBER SPIDER/INSECT SCREEN
®
The combustion air opening of the burner tube (5) is
fitted with a stainless steel screen to help prevent spiders
and other insects from spinning webs and building nests
inside (6) the burner tube. These nests can obstruct the
normal gas flow, and can cause gas to flow back out of
the combustion air opening (7). Symptoms of this kind
of obstruction include the odor of gas in conjunction
with burner flames that appear yellow and lazy. This
obstruction could result in a fire in and around the gas
valve, causing serious damage to your grill (8).
NOTE: If a spider/insect screen becomes damaged or
cannot be cleaned, please contact the Customer Service
Representative in your area using the contact information on
our web site. Log onto www.weber.com®.
BURNER TUBE PORTS
Over time, from repeated use of the grill, the burner
tube ports will become dirty. Blocked and dirty ports can
restrict full gas flow. Following are ways to determine
whether burner tube ports are dirty or blocked.
• Grill does not reach desired temperature
• Grill heats unevenly
• Burner does not ignite
1
6
5
8
2
3
4
7