AL-KO HT 440 BAsic Cut Traducción Del Manual De Instrucciones Original página 16

Remove any adjusting key or wrench before
„
turning the power tool on.
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
Do not overreach. Keep proper footing and bal-
„
ance at all times.
This enables better control of the power tool in un-
expected situations.
Dress properly. Do not wear loose clothing or
„
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
If devices are provided for the connection of
„
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
Power tool use and care
Do not force the power tool. Use the correct
„
power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
Do not use the power tool if the switch does
„
not turn it on and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
16
Disconnect the tool from the power source be-
„
fore making any adjustments, changing acces-
sories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
Store idle power tools out of the reach of chil-
„
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of un-
trained users.
Maintain power tools. Check for misalignment
„
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation.If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean.
„
Properly maintained cutting tools with sharp cut-
ting edges are less likely to bind and are easier to
control.
Use the power tool, accessories and tool bits
„
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situ-
ation.
Service
Have your power tool serviced by a qualified
„
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
Translation of original user instructions
AL-KO Hedge trimmer