■ Connect the headset
A compatible headset may be purchased with your phone or
separately as an enhancement. (See Enhancements, 96 for
information.)
1. Plug the headset connector into the Pop-Port™
connector at the bottom end of your phone.
2. Position the headset on your ear.
With the headset connected, you can make, answer, and
end calls as usual.
•Use the keypad to enter numbers.
•Press the Send key to place a call.
•Press the End key to end a call.
■ Change the Cut-Out™ covers
Note: Before removing the cover, always switch off the power and disconnect
the charger and any other device. Avoid touching electronic components while
changing the covers. Always store and use the device with the covers attached.
Remove the back cover and the battery
See Remove the back cover, 14 and Remove the battery, 14 for instructions on removing
the back cover and battery.
Remove the front cover
• Gently pull the bottom of the front cover away
from the rest of the phone and remove.
16
Copyright © Nokia 2004