Auto Mode - Omron M10-IT Manual De Instrucciones

HEM-7080IT-E.book 33 ページ ２０１１年１１月１４日 月曜日 午後１時５３分
3.
Press the MEMORY button (
of individual measurement values on the screen. The values
are displayed from the most recent to the oldest.
Note: The date and time are
alternately displayed with the
measurement values.
Press the MEMORY button to display the next set of values.
Press and hold the MEMORY button to display the values
faster.

Auto mode

The average for the consecutive measurements appears on
the display with the auto mode symbol (
values for the individual measurements press the SET button
while the average is displayed.
4.
Press the O/I START button to turn the unit off.
3. Using the Unit
) to display the most recent set
Alternating display
). To display the
EN
33