Auto Mode - Omron i-C10 Manual De Instrucciones

HEM-7070-E_i-C10_main.book 33 ページ ２０１１年１１月４日 金曜日 午前１０時２０分
3.
Press the MEMORY button (
set of individual measurement values on the screen. The
values are displayed from the most recent to the oldest.
Note: The date and time are
alternately displayed with the
measurement values.
Press the MEMORY button (
values.
Press and hold the MEMORY button (
values faster.

Auto mode

The average for the consecutive measurements appears on
the display with the auto mode symbol (
values for the individual measurements press the SET button
while the average is displayed.
4.
Press the O/I START button to turn the unit off.
3. Using the Unit
) to display the most recent
Alternating display
) to display the next set of
) to display the
). To display the
EN
33