Troubleshooting - Omron M10-IT Manual De Instrucciones

HEM-7080IT-E.book 42 ページ ２０１１年１１月１４日 月曜日 午後１時５３分
5. Handling Errors and Problems
5.2

Troubleshooting

Problem
No display appears
when the O/I START
button is pressed.
Cannot measure or
readings are too high.
The blood pressure is
different each time. The
reading is extremely low
(or high).
42
Cause
The batteries are empty.
Is the cuff wrapped
correctly around the arm?
The cuff pressure does
not rise although the
pump motor can be
heard.
Blood pressure readings constantly vary with time of
measurement and nervous condition. Take deep
breaths to relax before taking a measurement.
Remedy
Replace the batteries.
Attach the arm cuff
correctly.
Check that the air plug is
properly connected to the
unit. Push the air plug
firmly into the air jack.