Desk Mounting - Blackmagic Design Cintel Manual De Instalación Y Funcionamiento

Desk Mounting

For added stability, you can secure your scanner to your work surface using the mounting holes
in your scanner's feet. To do this, you'll need to drill two holes through your desk or work
surface so you can insert two M6 safety bolts and screw them into the mounting holes under
your scanner's feet. This will hold your scanner firmly to the surface and prevent it from moving.
267mm
When desk mounted, you can securely fasten your scanner to your work
surface by screwing M6 safety bolts into your scanner's feet.
NOTE Your safety is important to us and we strongly advise reading the warning
information on the following page before mounting your Cintel scanner.
546mm
Unpacking and Mounting 6