Blackmagic Design Cintel Manual De Instalación Y Funcionamiento página 88

Blackmagic Desktop Video Setup will detect your
computer is plugged into Cintel's USB recovery port
4 After the update recovery is complete, your Cintel Scanner should now be running
the latest software and operating normally. You can check this by disconnecting the
USB cable, connecting the thunderbolt cable, and then power cycling your scanner.
5 Replace the rear panel and reinstall your Cintel Scanner into position for normal
operation. If you need further assistance, you can always visit the Blackmagic Design
forum, or reach us via the Blackmagic Design support center.
Help 88