Foot Control - NSK Surgic XT Plus Operación Manual

4. Foot Control

PRG (Program) Button
Coolant Solution Flow
Volume Button
(1) Coolant Solution Flow Volume Button
Use to select 6 levels of coolant solution flow from 0 to 5; each level may be increased by one step pressing this
button. If you press this button in level 5, it returns to level 0.
(2) PRG (Program) Button
Use to select the desired program number. Program numbers will always ascend each time this button is pressed
and released. To descend, press and hold for 1 second then release.
(3) Speed Control Pedal
Used to start and stop the Micromotor and to control the speed during operation. The Micromotor operational speed
is directly proportional to the position of the foot control, up to the preset maximum.
(4) Forward/Reverse button
Used to change the rotational direction of the Micromotor. Push once to change the rotational direction.
Speed Control Pedal
6
Foot control Cord
and Plug
Forward/Reverse Button