Setting Up Connections - Aventics MC Serie Instrucciones De Servicio

50 AVENTICS | MC | 1987765452–BDL–001–AE
Installation
Fig. 6: Mating plug
Making connections
See Fig. 2
6. Screw the socket body to the mating plug casing; pay
attention to the orientation (different pin Ø on the mating
plug provide clarity).
7. Tighten the terminal fitting's lock nut until the sealing
element firmly holds the cable (IP 65 degree of protection,
strain relief).
72
A = 70 mm for cable Ø 9 mm
B = 80 mm for cable Ø 15.5 mm
4.4

Setting up connections

1. Make the FE connection (M5 screw on the left end plate)
according to VDE 100 and VDE 160.
2. Connect the cable to the controlling electrical system.
3. Plug the mating plug onto the multiple plug connector for
valve control and screw it tightly.
72