mabe EM5110BE Manual De Instrucciones página 10

10
standard burners
In two sizes 3" and 4" diameter.
important! Before lighting my surface burners, make
sure caps are PROPERLY seated in their place (except
porcelain enamel burners). Pins must fit into the
burner's slot in order to assure its place.
warning: My cooktop is sealed and cannot be re-
moved to clean the interior since it is unnecessary.
my operation
Surface Burners
a) Match ignition.
1. Control knobs must be in the OFF position.
2. Bring the match near the burner, push in and turn
the selected burner control knob, regulating flame
to the desired size.
yellow-tipped flames
economic and standard burners
1. Make sure my burner is off and cool, then re-
move my grates and the burner pulling it straight
up.
2. Slide up or down the shutter on the regulator
tube, until achieving the desired flame.
oven burner
1. To locate the burner, remove the oven bottom as shown in the illustra-
tion.
2. Loosen the screw located in the burner and turn the air shutter left or
right until flames have no yellow tips. Flames should not lift off burner
ports.
3. Replace oven bottom making sure the ignition hole faces to the front.
Incorrect:
Yellow tips
Oven
burner
Oven
bottom
Correct:
Blue tips
adjustment screw
shutter