dirna Bergstrom bycool COMPACT 1.4 Instrucciones De Montaje página 22

COMPACT 1.4
EN
1
Connect the power cable to the unit, secure
to the roof with the mounts and adhesive and
flanges. Then lower the cable through the rear
of the cabin.
1
2
Connect the other end of the cable and connect
the positive wire (blue) to the connections box in
position X4.
Note: Depending on the location of the connections
box, the positive wire will have excess length. Cut
this to the required length.
2
Pass the cabling through position X4 and
clamp the terminal
DETAILED INSTRUCTIONS ON
POWER CABLE CONNECTION
22
Run the wire through the
supplied rubber sleeve
2
Position the supplied 30A fuse and secure with
nut and washer
®
1
2