Locating A Particular Portion On A Track - JVC KD-SH9750 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Note:
If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to prevent it from dust. (Disc will not play
this time.)
What is ImageLink
When an MP3 or a WMA folder includes an
image <jml> file edited by Image Converter
(supplied in the CD-ROM), you can show the
image on the display while the tracks in the
folder are played back.
• While reading an image <jml> file, no
sounds come out (the preset image of a
coffee cup is shown on the display during
this period).
Album 1
Music001.mp3
(Folder 1)
Music002.mp3
Music003.mp3
Photo1.jml
Album 2
Music004.wma
(Folder 2)
Music005.mp3
Music006.wma
Photo2.jml
Photo3.jml
If there are more than one <jml> file in a folder, a
<jml> file with younger playback order number
will be shown on the display (in the above
example, "Photo2.jml" will be used for Album 2).
To activate ImageLink, follow the procedure
below
• See also "Changing the general settings
(PSM)" on page 39.
1
Press and hold SEL (select) for more than 2
seconds so that one of the PSM items
appears on the display.
2
Press number button 1 to select—
"MOVIE"—Movie category of the PSM
settings.
The "Graphics" setting screen appears on
the display.
3
Turn the control dial to select "ImageLink."
4
Press SEL (select) to finish the setting.
ImageLink starts functioning when the next
folder starts playing.
Display window
Photo1.jml
Display window
Photo2.jml
Note:
ImageLink will not work in the following cases:
• If no <jml> file is included in an MP3/WMA
folder.
• If Intro Scan is activated.
• If the source is changed to another from "CD, " or
• If you turn off then on the unit while the preset
image of a coffee cup is shown on the display.
Locating a particular portion
on a track
To fast-forward or reverse the track
Press and hold ¢
playing a disc, to fast-forward the
track.
Press and hold
playing a disc, to reverse the
track.
Note:
During this operation on an MP3 or WMA disc, you
can only hear intermittent sounds. (The elapsed
playing time also changes intermittently on the
display.)
To go to the next or previous tracks
Press ¢
playing a disc, to go ahead to
the beginning of the next track.
Each time you press the button
consecutively, the beginning of
the next tracks is located and
played back.
4 briefly, while playing a disc, to go
Press
back to the beginning of the current track.
Each time you press the button consecutively, the
beginning of the previous tracks is located and
played back.
, while
4 , while
briefly, while
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kd-sh9700

Tabla de contenido