Selecting A Disc/Folder/Track Using The Name Lists - JVC KD-SH9750 Manual De Instrucciones

Selecting a disc/folder/track
using the name lists
To select a disc using the disc lists
If you forget what discs are loaded in the CD
changer, you can show the disc name list and
select a disc in the list shown on the display.
• The display can show only six names at a time.
1
While playing a disc, press and hold
5 (up) or ∞ (down) until a disc name
list appears on the display.
Note:
If a disc has a disc title (CD Text) or an assigned
disc name, it will be shown on the display.
However, if the disc has not been played before,
its disc number will appear.
2
Press 5 (up) or ∞ (down) to show
the other disc name list, if
necessary.
3
Select the number (1 – 6) for the disc
you want to play.
1 2 3 4 5
While playing an MP3 disc, you can also show
the folder list(s) and track list(s) on the display,
then select a folder or track.
1
While playing an MP3 disc,
press and hold 5 (up) or
∞ (down) until a disc name list
appears on the display.
Press ¢
2
show a folder list of the
current disc or track list of the
current folder.
Each time you press the button, the lists on
the display change as follows:
Ex. When folder list is selected
Ex. When track list is selected
Note:
The display can show only six names at a time. You
can show the other names on the next lists by pressing
5 (up) or ∞ (down).
3
Press the number button for the disc, folder or
6
track you want to play.
4 to
or
51