Selecting The Level Meter - JVC KD-SH9750 Manual De Instrucciones

5
Set the clock system.
1 Select "24H/12H."
2 Adjust "24Hours" or "12Hours."
1
6
Finish the setting.
SEL
To check the current clock time when the unit
is turned off, press DISP (D).
The power turns on and the clock time is shown
for about 5 seconds, then the power turns off.

Selecting the level meter

You can show the level meters on the display
while playing any source. This unit is equipped
with three level meter patterns.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 40.)
SEL
2
Press number button 3 to select
"DISP"—Display category of the PSM
settings.
3
3
Select "Theme."
2
ATT
4
Select the level meter pattern you
want.
ATT
5
Finish the setting.
SEL
Standard:
No level meter appears on the display. (Initially
selected when shipped from the factory.)
Meter 1:
The left and right audio level meters appear.
Meter 2:
Level meters fluctuate horizontally from center to
both sides as audio levels changes.
Meter 3:
Signal waves fluctuate at the center and spread
outward.
As you turn the control
dial, the level meters
change as follows:
Meter 1
Standard
Meter 2
Meter 3
9