Tabla De Contenido; General Information - Hilti PD-E Manual De Instrucciones

ORIGINAL OPERATING INSTRUCTIONS
PD-E laser range meter
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions to-
gether with the tool.
Ensure that the operating instructions are
with the tool when it is given to other persons.
Contents
1 General information
2 Description
3 Accessories
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty - tools
12 FCC statement (applicable in US) / IC
statement (applicable in Canada)

1 General information

1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the tool"
always refers to the PD-E laser range meter.
Parts, operating controls and indicators 1
Rear contact surface
@
Reference indicator LED for rear contact
;
Left arrow button
Page
=
"Menu" button
1
%
"Measure" button
2
&
Graphic display
3
(
Reference indicator LED for front contact
4
)
Side "Measure" button
5
+
On/off button
6
§
Right arrow button
9
/
Wrist strap attachment point
16
:
Delete (clear) button
17
·
17
¹/₄" thread for PDA 72 measuring extension
18 $
Folding spike
£
Laser emitting and receiving lens
18
|
Optical sight
¡
¹/₄" thread on the underside
Q
1.2 Explanation of the pictograms and other
information
Symbols
Read the Return waste
operating
instructions
before use.
Laser Class
2
Laser class II
material for according to
recycling. CFR 21, § 1040
(FDA)
KCC-REM-
HLT-PD-E
en
1