2 Inserting the battery pack/a "Memory Stick Duo" (not
supplied)
Battery/"Memory Stick
Duo" cover
1
Open the battery/"Memory Stick Duo" cover.
2
Insert the "Memory Stick Duo" (not supplied).
3
Insert the battery pack.
4
Close the battery/"Memory Stick Duo" cover.
[
When there is no "Memory Stick Duo" inserted
The camera records/plays back images using the internal memory (approx. 22 MB).
[
To check the remaining battery charge
Press
(POWER) to turn on and check the remaining battery charge on the LCD screen.
Remaining
charge
indicator
Status
Sufficient
power
remaining
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct depending on conditions of use and circumstances.
• The Clock Set screen appears when you turn on the camera for the first time (page 13).
With the terminal side
facing the LCD screen,
insert the "Memory
Stick Duo" until it clicks
into place.
Battery
Battery half
almost fully
full
charged
Battery
eject lever
Align the v mark of the battery
slot with the v mark on the
battery pack. Press and hold the
battery eject lever and insert the
battery pack.
Battery low,
Change the battery to
recording/
a fully charged one,
playback
or charge the battery.
will stop
(The warning
soon.
indicator flashes.)
GB
11