Information About Scrapping; Environmental Information - Corghi A 222 Manual De Uso

CORGHI declines all liability for claims deriving from the use of non-original spares
or accessories.
The filter-regulator unit filters the air and regulates air
pressure.
The FRL unit supports a maximum input pressure of 15
bar and has an adjustment range of 0.5 to 10 bar. The
setting may be modified by pulling the handle out and
then turning. After adjusting, return the handle to the
locked position by pushing down (fig. 35a).
The regulating filter unit is equipped with a semiauto-
matic device to drain the condensate.
This device is automatically activated whenever pneu-
matic supply to the machine is cut off.
Drain the condensate manually (1, Fig. 35b) when the
level rises above level 2, Fig. 35b.
Keep the work area clean.
Never use compressed air, water jets or solvents to remove dirt or deposits from the
machine. When cleaning the area, take steps to avoid building up and raising dust as
far as possible.

9. INFORMATION ABOUT SCRAPPING

If the machine is to be scrapped, remove all electrical, electronic, plastic and metal parts
Dispose of them separately, as provided for by local regulations in force.

10. ENVIRONMENTAL INFORMATION

The following disposal procedure must be applied to the machines having the crossed-
out bin symbol on their data plate.
This product may contain substances that can be hazardous to the environment and to
human health if it is not disposed of properly.
Operator's manual A 222
NOTICE
NOTICE
2
1
35a
35b
109