Bluetooth Operation - Roadstar RCR-3025EBT Manual De Instrucciones

3 English
4. Press [PLAY] (8) to start playing tape.
Press [PAUSE] (4) when you want to stop playing tape operation temporarily,
•
press again to resume tape operation.
Press [STOP/EJECT] (5) when finished,
•
Press [F.FWD] (6) or [RWD] (7) to
•
verse direction.
CASSETTE RECORDING
The unit can record from Radio, Bluetooth, USB/SD or Built-In microphone.
1. Insert the cassette into the [CASSETTE SLOT] (22);
2. Perform normal playback of the source you want to record;
3. Press the [RECORD] (9) and [PLAY] (8) buttons together to start recording;
4. Once the record is finished, press the
USB/SD OPERATION
1. Set the [FUNCTION SELECTOR] (10) to "USB" mode;
2. Plug an USB / SD stick into the
3. Playback will start automatically from the first track.
Note: Some mp3 player may not be able to play via the usb socket. this is not a mal-
function of the system.
Note: To avoid damage to USB/SD memory, remove it only when the radio is OFF.
DIRECT USB/SD ENCODING
The unit can encode from Radio, Tape or Built-In microphone.
1. Plug the USB or SD stick into the [USB/SD PORT] (26/27);
2. Perform normal playback of the source you want to encode & record;
3. Press the [ENCODING] button (16) to start encoding;
4. Once the record is finished, press the

BLUETOOTH OPERATION

1. Set the [FUNCTION SELECTOR] (10) to "BT" mode;
2. Press the [MODE] (17) repeatedly to select Bluetooth mode (BLUE LED);
3. Connect your Bluetooth portable device to the ID Bluetooth tagged as "RCR-
3025EBT";
4. You can now transfer the music to the
Note: Music control (play, pause, etc) must be done from your external device.
press again to open the door.
start rapid tape winding either forward or re-
[RECORD]
[USB/SD PORT] (26/27);
[ENCODING]
RCR-3025EBT.
button (9) to stop recording.
button (16) to stop recording.