Clamping The Wheel - CEMB SM1100 Manual De Uso

9.4. CLAMPING THE WHEEL

Only use the lifter pedals when loading and unloading the wheel.
Do not press these pedals during any other procedures!
- Load the wheel onto the wheel lifter (Fig. 16).
- Press the pedal to lift the wheel
- Manually lay the wheel onto the turntable and lower the lifter by releasing pedal 16.
- When positioning the wheel on the turntable, also
make sure that the movable pin, situated radially on the
turntable, is centred correctly in one of the fastener bolt
holes (Fig. 16a).
38
WARNING
1
3
"ML" VERSION
2
16
16a
User's manual