CEMB SM1100 Manual De Uso página 53

7) Upper bead mounting
- Use the bead depressor tool (Fig. 40) and, if necessary, the bead depressor pliers,
applied to the shoulder of the wheel rim, ensuring that the upper bead is in the well.
Avoid Personal Injury. Ensure that the top bead is held correctly by the tool
before mounting.
- Press the pedal
Once the mounting phased is complete, raise the bead breaker disc and the
bead presser tool (control
- Remove the bead pressing pliers or the bead pressing tool.
- Return the bead breakers on the upper and lower sides to the rest positions.
Risk of crushing. Positioning the bead-pressing tool against the tyre could
be dangerous in some respects. Never place any part of the body, particularly
hands between tools and wheel.
Avoid personal injury. Make sure the top bead is correctly inserted in the rim
well, throughout the mounting stage.
Position the bead pressing tool in the correct rest position so that it does not
in-terfere with the work area.
User's manual
WARNING
to activate rotation until the second bead is mounted.
WARNING
)
WARNING
WARNING
WARNING
EN
53