Wheel Mounting - CEMB SM1100 Manual De Uso

9.8. WHEEL MOUNTING

RISK OF EXPLOSION. Always check that the tyre/rim combination is correct in
terms of compatibility (tubeless tyre on tubeless rim, tyre type with inner tube
on rim for inner tube) and geometric dimension (shrinkage diameter, width cross
section, off-set and shoulder profi le) before mounting.
AVOID THE RISK OF PERSONAL INJURIES OR DEATH.
Also check that the rims are not deformed, that their fastening holes have not
become oval, that they are not encrusted or rusted and that they have no sharp
burrs on the valve holes.
Check that the tyre is in good condition with no signs of damage.
1) Tyre preparation (fi g. 36)
- Lubricate the sides of the tyre thoroughly along the entire circumference of the bottom
and top beads (A).
- Place the tyre on the rim (B)
A
2) Head positioning (fi g. 37)
- Operate pedal
head into its working position.
User's manual
DANGER
to move the
B
EN
36
37
51