CEMB SM1100 Manual De Uso página 52

The tool is already in the correct position for mounting the tyre, unless the type
of rim has been changed.
3) Lower bead mounting (fig. 38)
- Place the bottom bead of the tyre under-
neath the tool and at the same time apply
a little pressure
to the tyre by hand while starting to rotate
the wheel (pedal
bead insertion.
- Rotate until tyre mounting is complete.
4) Upper bead positioning (fig.39)
- Position the upper tyre bead.
Take care that the tyre does not slip underneath the tool.
5) Bring the bead breaking unit closer
6) Bead breaker disc positioning (fig.39)
- Operate the lever
upper bead breaker disc to the level of the
wheel rim well and position the tyre correctly
(fig.51), and then press the button
to activate upper disc penetration.
52
WARNING
), for easier
WARNING
to lower the
A
B
User's manual
38
39