Proper Use; Air Supply - Würth PNG 102 Instrucciones De Servicio

Prod. no.
Weight
Operating pressure
Stroke length
Hose connection diameter / 1/4"
Air consumption per rivet
Setting force at 5 bar
Volume of collector (rivet pins)
Hydraulic oil ISO VG 32 to 46
Blind rivet diameter (aluminium)
Blind rivet diameter (all materials)
Maximum pin diameter
Compressed air lubricant
Noise emission
Vibration
Tips
The following tips are included in the delivery:
PNG 102
• 17/27, 17/29, 17/32, 17/36
PNG 122
• 17/36, 17/40, 17/45
Suitability of tips (table 1)
Tip Prod. No.
Diameter
[mm]
17/27 0949 20 4 4,0
4,0
17/29 0949 20 5
4,8 / 5,0
17/32 0949 20 6 4,8 / 5,0 Aluminium, steel
4,8 / 5,0
17/36 0949 20 7
6,0
6,0
17/40 0949 20 21
6,4
6,4
17/45 0949 20 22
8,0
Blind rivet gun data
0703 937 22 (PNG 102) 0703 937 33 (PNG 122)
1,6 kg
5 - 7 bar
18 mm
6 mm
2,3 l
9.000 N
approx. 100 to 200 (depending on size)
approx. 30 ml
2,4 - 6 mm
2,4 - 5 mm
3,2 mm
78 dB
< 2,5 m/s
The machine is designed for the setting of blind rivets
from various materials.
The operator shall be fully responsible for any damage
caused by improper use.

Air supply

Blind rivet
To ensure trouble-free operation, the gun must be sup-
Material
plied with a sufficient volume of dry filtered and oiled
air at the required pressure.
Aluminium, steel
When compressed air is produced with compressors,
Steel, stainless
water contained in the air collects as condensate in the
steel
pressure vessel and the pipelines. It must be drained off
through a water trap. Check and empty the water trap
Aluminium,
at least once daily.
copper
The pipelines feeding the compressed air to the ma-
chine should be equipped with a compressed air main-
Steel, stainless
tenance unit (filter/water trap/oiler) located as close
steel
as possible to the connecting point. Check the oiler at
least once every day and add oil, if necessary (for rec-
Aluminium
ommended oils, see machine data).
Steel
Compressed air connection
Aluminium
The blind rivet gun may only be operated with clean,
Aluminium, steel
dry compressed air at a controlled pressure (see ma-
Aluminium
chine data).
To connect the gun to the compressed air supply, use a
quick-release coupling.
1,9 kg
5 - 7 bar
25 mm
6 mm
4,8 l
14.000 N
approx. 30 ml
2,4 - 8 mm
2,4 - 6,4 mm
4,5 mm
------------------------ Art. 0893 0505 --------------------------
79 dB
< 2,5 m/s
2

Proper use

Start-up (fig. I)
2
9