Operating Controls; Before Use - Würth master BST 1 Traducción Del Manual Original

Operating controls

1 Muzzle
2 Splinter Protector (Art. 864 000)
3 Safety lock
4 Trigger
5 Cartridge guide
6 Cylinder assembly
7 Spring
8 Rubber seal
9 Lock spring
10 Safety button
11 Front cylinder
12 Cylinder holder clip
13 Cylinder holder
14 Stud guiding barrel
15 Driving piston
16 Piston guide with cartridge chamber
17 Charge feeding rod

Before use

Mount the splinter protector 2
Perform Functional Checks
(Without cartridge and stud)
1. Cock the tool.
2. Press against a hart surface.
3. Pull the trigger 4. The "click" of the firing pin must
be audible.
Repeat step 1 to 3 several times.
Suitable Base Materials:
Concrete:
Bulk concrete of good quality
Compression strength of 20-50 N/mm
Thickness of at least 100 mm
Masonry:
Hard bricks
Compression strength of 10-40 N/mm
With good quality, firm mortar joints
Steel:
Soft, non-alloyed steel
Thickness of 4-12 mm
2
2
15