Troubleshooting - Schumacher Electric PI-200 Manual Del Usuario

9.

TROUBLESHOOTING

PROBLEM
Red LED is on,
audible alarm
is on, and/or
inverter does not
function.
The red LED is
lit and the green
LED is not.
REASON
Poor contact at
terminals.
Fuse blown.
Inverter
shutdown.
Inverter may
not be working
properly.
12V Accessory
plug or clips are
not making a
good connection
to the battery.
Connections are
reversed.
Inverter may
not be working
properly.
• 10 •
SOLUTION
Unplug and reinsert the
12-volt plug or check
connections at power supply.
See "IF THE INVERTER
FUSE BLOWS" section.
See "LED INDICATOR
AND SHUTDOWN
PROTECTION" section.
See Warranty and call
Customer Service
1-800-621-5485 (Hours:
7:00 am – 5:00 pm CST).
Check for poor connection
to battery and frame. Make
sure connection points
are clean. Rock clips
back and forth for a better
connection.
Unplug the charger and
reverse the clips.
See Warranty and call
Customer Service
1-800-621-5485 (Hours:
7:00 am – 5:00 pm CST)