Original Instruction Manual; Handling; Applications; Pumped Liquids - Pentair PVM Serie Instrucciones De Funcionamiento

EN
ORIGINAL INSTRUCTION
CHAPTER 2

HANDLING

Read these instructions carefully before beginning installation. Lift and handle these pumps carefully. PVM/PVMI/PVMX series are
vertical multi-stage non-self priming pumps coupled with standard electric motors. This manual applies to standard version pumps and
for standard applications.
This manual is an integral part of the product and must be consulted before first use and to ensure correct use and maintenance.
CHAPTER 3

APPLICATIONS

PVM/PVMI/PVMX series in-line pumps booster pumps are designed for a wide range of applications in various industries – for water
treatment, water boosting, water supply, cooling, cleaning, etc.

PUMPED LIQUIDS

These pumps are designed for use with clean, non-viscous and non-explosive liquids that do not contain abrasive matter.
WARNING
These pumps are not designed to be used with abrasive, solid containing, explosive and corrosive liquids.
All materials in contact with water have been tested and approved, therefore only original replacement parts should be used.
NOTE
The pump is suitable for use with drinking water for human consumption (Italian Ministerial Decree 174 and ACS). If the pump has been
assigned to uses other than water for human consumption, it may no longer subsequently be used for that purpose.
2