Stamp Function - Brother P-Touch 2300 Guía De Usuario

To select a preset format:
1 Hold down c and press Y once. The currently selected setting appears in the dis-
play.
2 Press h or e to select the desired setting.

To return to default settings, press _.
3 Press r to apply the selected setting.

The Length indicator comes on if any setting other than DEFAULT is selected.
EXAMPLE
To select the AUDIO CASSETTE setting:
1
Hold down
h
2
Press
setting is displayed.
r
3
Press
The Stamp function allows you to quickly and easily create your own stamp stencil films for
customized stamps. After inserting a stamp film cassette, select this function to automatically
center the text and adjust the tape length and margins to a perfect format for the pre-inked
stamp film holders. Since the stamp holder is reusable, just make a new stamp stencil film and
replace the one in the holder.
To make a stamp:
1 Type in the text, and then insert a medium (3/4" (18-mm)-wide) or a large (1" (24-mm)-
wide) stamp film cassette.
2 Hold down c and press U once. The message "STAMP FORMAT?" appears in the
display.
c Y
and press
e
or until the AUDIO CASSETTE
.

STAMP FUNCTION

.
Alt
Caps
Alt
Caps
D E F A U L T
A U D I O
C A S S E T T E
41