Assembling The Unit - Stihl BR 450 Manual De Instrucciones

English
For maintenance items please also refer
to the maintenance chart in this
instruction manual.
Store the power tool in a dry and high or
locked location out of reach of children.
Before storing for longer than a few
days, always empty the fuel tank. See
chapter "Storing the machine" in this
instruction manual.
Store fuel in an approved and properly
labeled safety-type canister only. Take
care when handling gasoline! For health
and safety reasons, avoid direct contact
with the skin and avoid inhaling fuel
vapor!
12

Assembling the Unit

Mounting the Hose Clamps and Pleated
Hose
1
3
Push the hose clamp (1) (with
N
retainer for throttle cable) onto the
elbow (3) – the positioning marks
must face to the left.
Push the pleated hose (2) over the
N
elbow (3).
1
3
4
Push the hose clamp (1) onto the
N
pleated hose (2).
Line up the positioning marks on the
N
hose clamp (1) and elbow (3) – the
screw lug faces down.
Secure the hose clamp (1) with the
N
screw (4).
2
Push the hose clamp (5) (without
2
N
retainer for throttle cable) onto the
blower tube (6) – the positioning
marks must face to the right.
Push the blower tube (6) into the
N
pleated hose (2).
2
7
2
Push the hose clamp (5) onto the
N
pleated hose (2).
Line up the hose clamp (5) and
N
blower tube (6) – as shown.
Secure the hose clamp (5) with the
N
screw (7).
5
6
5
6
BR 450, BR 450 C