Mounting The Housing - Bosch AEC-AMC2-UL2 Manual De Instalación

AEC-AMC2-UL2 - Installation manual
G = Pre-assembled cable with temperature sensor
H = Three screw anchors S8 and wood screws M6 x 50
J = Bracket for cable fixing

Mounting the Housing

Open the housing cover lock with the provided key and remove
the hood from the wall mounted frame.
Mount the metal housing at the desired position with the screw
anchors provided with the enclosure.
Use the screws (position H of the accessories kit) at the points
to mount the housing against the wall.
Figure 3 Demensions of the housing
Bosch Sicherheitssysteme GmbH
en
F.01U.097.253 | V 3.2 | 2010.01
7