1 Foreword
INFORMATION
Last update: 2016-02-11
►
Please read this document carefully before using the product.
►
Follow the safety instructions to avoid injuries and damage to the product.
Please contact the manufacturer if you have questions about the product (e.g. regarding the
►
start-up, use, maintenance, unexpected operating behaviour or circumstances). Please see
the back for contact information.
►
Please keep this document in a safe place.
The product "60X3 BionicLink" is referred to as the product/BionicLink below.
2 Product description
The BionicLink provides wireless data communication between the knee joint and a computer
with 60X5 BionicLink PC using Bluetooth technology.
Patient-specific adjustments can therefore be carried out without a cable connection, and the
patient has more freedom of movement during the adjustment process. The BionicLink must be
removed from the patient's prosthesis after adjustment.
The BionicLink is suitable for patients with a left-sided or right-sided fitting.
INFORMATION
The 60X3 BionicLink does not require any batteries for operation, as it is powered by the battery
of the prosthesis.
2.1 Combination possibilities
•
4X181-2 C-Leg wireless adapter cable
3 Application
3.1 Indications for use
The product is to be used exclusively for data communication for adjusting a C-Leg or C-Leg
compact prosthesis system.
3.2 Conditions of use
The fitting of a patient with the product may only be carried out by an orthopaedic technician.
4 Safety
4.1 Explanation of warning symbols
NOTICE
Warning regarding possible technical damage.
4.2 Structure of the safety instructions
CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe the safety instruc
tions. Consequences are presented as follows if more than one consequence is possible:
>
E.g.: Consequence 1 in case of failure to observe the hazard
>
E.g.: Consequence 2 in case of failure to observe the hazard
16 | Ottobock