EN
OPERATING INSTRUCTIONS
1. Operation via remote control
ON / OFF (1)
To switch on, press the field with the ON / OFF symbol. The fan starts at power level 1 and
the first two LED shine. To switch off, press the ON / OFF symbol again.
Increase fan power (2)
Press the Increase fan power icon. The fan power increases by one power level each time
the button is pressed.
Reduce fan power (3)
Press the Reduce fan power icon. The fan power decreases by one power level up to
power level 1 with each press.
int
Intensive level (5)
The maximum fan output is reached by pressing the Intensive level button. The fan power
switches back by one power level after 5 minutes.
Automatic follow-up time (6)
Touching the field with the follow-up time symbol activates the automatic follow-up time and
the follow-up time symbol flashes. The cooker hood switches back from the current level o-
ne level down at 5-minute intervals and switches off definitively after maximum 15 min.
Filter saturation indicator (F)
(automatic display after 15 operating hours)
The filter saturation indicator will be reset by pressing the key
(1) (~10 sec.) until the red LED turns off. ( Device must be in
ON mode ).
Illumination (4)
Press the button with the light icon to turn on the hob light.
Press again to switch off the hob lighting.
Illumination dimming function (4) long
If the lighting symbol is held down for a longer time, the hob
lighting is dimmed.
Colour temperature setting ( TW version only )
The colour temperature of the LED hob lighting can be
infinitely adjusted between 2700K and 6500K.
Press and hold the delay button (6) to adjust, the LEDs start
to change the colour temperature. When the desired setting is
reached, release the button, the colour setting is saved.
Note : If the RC functions are limited or not available please check
battery capacity first.
20