Yamaha YAS-152 Manual De Instrucciones página 9

Ocultar thumbs Ver también para YAS-152:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Remote control signal transmitter
Transmits infrared signals.
(power) key
Turns on or off (standby) the sound bar.
Green (turned on)
Red (Bluetooth standby)
Off (turned off)
BLUETOOTH STANDBY key
Enables/disables the Bluetooth standby mode.
(p.9).
SURROUND and STEREO keys
Switch between surround and stereo (2-channel)
playback. When surround playback is selected,
you can enjoy a realistic sound effect using
Yamaha's exclusive AIR SURROUND XTREME.
SURROUND
Lights up (surround playback)
STEREO
Off (stereo playback)
HINT
• When 2-channel stereo signals are played in surround,
the
PLII indicator lights up.
Lights up (Dolby Pro Logic II)
MUTE key
Mutes the audio output. Press the key again to
unmute.
Flash (on mute)
CLEAR VOICE key
Enables/disables the clear voice function.
When this function is enabled, you can enjoy clear
voice sounds while watching movies, TV dramas,
news programs or sports programs.
Flash 3 times (enabled), flash once (disabled)
UNIVOLUME key
Enables/disables the UniVolume function.
When this function is enabled, consistent volume
is maintained between channels, programs,
commercials and sound sources.
Flash 3 times (enabled), flash once (disabled)
HINT
• The UniVolume function is automatically disabled when
BLUETOOTH or PORTABLE is selected as the input source.
AUDIO DELAY key
Adjusts the audio delay to synchronize the sound
with the video when the video image on the TV
may seem delayed with respect to the sound.
Follow the procedure below to adjust the audio
delay.
1 Hold down AUDIO DELAY for more than 3
seconds.
The left most indicator flashes.
2 Press SUBWOOFER to adjust the audio delay.
Smaller delay (–)
Larger delay (+)
3 To finish the adjustment, press AUDIO DELAY.
HINT
• The adjustment will be finished automatically if no
operations are performed for 20 seconds.
Decoder indication
The sound bar supports the following audio signals. You
can check the type of the input audio signal by the color
of the indicator.
Green (Dolby Digital), Red (DTS Digital Surround)
Off (PCM)
Auto-sleep function
The sound bar will be automatically turned off when one
of the following conditions is met.
• No operations for 8 hours
• No audio input and no operations for 30 minutes
7

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido