Use; Installation; Before Use; Start-Up - LIVARNO LUX HG00092A Instrucciones De Montaje, De Uso Y De Seguridad

Use

Note: Remove all packaging materials from the product.

Installation

Secure the mounting plate
screws or adhesive pads
6
respectively.
Place the eyes on the bottom part of the LED light
ing plate and latch in the LED light, sliding it sideways as illustrated
in Figure E.

Before use

The batteries
5
Pull the two insulating strips out of the two battery compartments to
activate.

Start-up

For both model HG00092A and HG00092B, the swivel spotlights
can be tilted approx. 45° in any direction (see Fig. A or B).
20 GB/IE
7
are factory installed.
to a level wooden surface using the
included. Refer to figures C or D,
8
onto the mount-
1
2