Using The Core Filter; Connecting The Tv - Viewing The Video/Picture From Ipod On Your Tv - JVC TH-LB3-B Manual De Instrucciones

Getting started

Using the core filter

To reduce interference, be sure to attach the provided core filters to
the power cord and the external component cord.
Run the cable through the core filter, and wind it firmly once inside.
Close the core filter until it clicks shut. (You can wind the cords
together.)
DC power cord (to DC IN jack)
RCA pin plug cord (to SUBWOOFER PRE-OUT terminal)
TV remote pass
through cable (to
IR OUT terminal)
Digital coaxial cord (to DIGITAL IN 2 terminal)
Audio cord (to ANALOG IN terminal)
Composite video cord
(to VIDEO OUT terminal)
CAUTION
Do not damage the cord by applying expressive force when winding.
(continued)
5
Connecting the TV — viewing
the video/picture from iPod on
your TV
You can view a video/picture from iPod connected to the unit on
your TV. Connect the video input terminal on your TV, etc. to the
VIDEO OUT terminal with the video cord (not supplied).
Setting the video output
While the source is selected to IPOD and iPod is not connected to
the unit...
Press and hold iPod 6 (main unit).
Each time you press and hold the button, VIDEO OFF and VIDEO ON
scroll on the display.
VIDEO OFF : The video/picture from iPod is shown on iPod itself.
VIDEO ON : The video/picture from iPod is shown on the TV.
Rear of the unit
VIDEO
OUT
Composite video cord
(not supplied)
TV, etc. (not supplied)