Buttons And Lamps On The Front Panel; Adjusting The Sound Level; Using The Surround Mode - JVC TH-LB3-B Manual De Instrucciones

Buttons and lamps on the front panel

1
(power) button
2 INPUT button
Press the button repeatedly to select the input source
(DIGITAL 1 (DGTL1), DIGITAL 2 (DGTL2), TV ARC,
ANALOG, HDMI 1, HDMI 2).
3 iPod 6 button
Press the button to play back iPod.
4 SSHD button
Press to turn on/off StudioSound HD.
5 VOLUME +/– buttons
Adjusts the volume within the range of 0 (MIN) to
40 (MAX).
6 Remote sensor
Receives the signal from the remote control.

Adjusting the sound level

You can adjust the bass and treble sound level within the range of
–3 to +3.
1
Press SETTING to enter the setting mode.
– BASS: Adjusts the bass sound level.
– TREBLE: Adjusts the treble sound level.
2
Press 4 or ¢ to select the item you want to
set.
3
Press UP/DOWN to adjust the level.
NOTE
The change in the bass and treble sound level of the speakers differ
depending on the incoming signal of the input source.
7 STANDBY indicator lamp
Lights up while the power is turned off.
SSHD indicator lamp
Lights up while StudioSound HD is activated.
TVOL indicator lamp
Lights up while TruVolume is activated.
8 Tray for iPod dock
Push the tray to open the dock for iPod.
9 Display
Shows the volume level, the current source and the
settings.

Using the surround mode

You can listen to a more realistic sound than stereo sound using
surround—StudioSound HD (SSHD).
Press SSHD.
Each time you press the button, surround mode is turn on and off
(SSHD ON and SSHD OFF scroll on the display).
8