Operations
(continued)
Playing back iPod
Connecting iPod
While the power is turned off...
1
Push the tray (8) to open the dock for iPod.
2
Connect iPod to the connector.
•
You cannot connect iPod to the unit if it is covered by something
or with accessories attached. Remove them before connecting.
•
Keep iPod in a straight position while connecting/disconnecting
it.
•
Do not carry the unit with iPod connected. It might cause
damage to the dock for iPod or you might drop iPod.
•
Do not touch or hit the iPod terminal pins or connector pins in
the dock for iPod directly. Doing so might cause damage to the
connector pins.
•
While the power is turned on, or during Standby with HDMI Pass
Through ON, iPod can be charged.
Playing back
Press iPod 6.
•
While the power is turned off, simply pressing iPod
on the power and plays back iPod.
Pausing/resuming playback
Press iPod 6.
Skipping forward/back
Press and hold ¢ or 4.
Skipping to the next track
Press ¢.
iPod (not supplied)
6 turns
9
Skipping back to the previous track
Press 4 twice or more repeatedly.
Returning to the beginning of the track
Press 4 once.
Putting iPod in sleep mode
Press and hold iPod 6.
Displaying a menu/Returning to the
previous menu
Press MENU.
Selecting an item on the menu
Press UP or DOWN, then press SELECT.
NOTES
•
Operate iPhone or iPod touch itself in the following cases:
–
When operating the home button.
–
When selecting application icons on the home screen.
–
When dragging the slider.
•
Sound distortion may occur when playing back audio sources with
high recording levels. If distortion occurs, it is recommended to turn
off the equalizer of iPod.
•
You can select the video signal format (NTSC or PAL) in the setting
menu on iPod.