Installation And Connections; Hardware Installation; Attachment (Wall Mount Version) - Gorgy Timing RADIO TIMING 9S Modo De Empleo/Instrucciones De Montaje

2.1. HaRDwaRE InStaLLatIOn

2.1.1. attachment (wall mount version)

► Use the wall support as drilling template.
► Attach the wall support fitted with hinges on the wall using 5 mm Ø screws (not
supplied).
135
☛
The bottom screw acts as an anti-theft device: tighten it firmly.
Position the RT9s in front of the fixed hing-
es, align the hinge holes and the holes on
the RT9s, and then insert the pins into the
hinges (A).
72
2.
☛
required for the initial start-up of the product
150
Ø 5,2
3 x Ø 5

InStaLLatIOn anD COnnECtIOnS

A
To block the rotation of the unit, insert a pin
into the horizontal hinge (B).
B
2
1
MDE-RT9s-3079V1.0