Configure Ip Address; Force Relay States (If Available) - Gorgy Timing RADIO TIMING 9S Modo De Empleo/Instrucciones De Montaje

► Example: For France, the fields with take the value "+1" and "Europe" (which is UTC time
+ 1 with European DST change).
It is highly important to configure the time zone and daylight saving
time (DST) change fields correctly. If these fields are not set cor-
rectly, there will be errors in the time outputs, or the relay switching
times will be shifted.
When you confirm this page, the RT9s switches automatically to its
internal clock and therefore ignores any external synchronisation
source. to reactivate the synchronisation source, see Section 4.6
tIme INputS / outputS.

3.5. COnfIGURE IP aDDRESS

This screen allows you to modify the RT9s's
IP address as well as the subnet mask and
the gateway address, if any.
The first field on the top left is the IP address
assignment mode:
► "A" for Automatic: the address is assigned by a DHCP server.
► "M" for Manual: the address used is the one specified by the user on the screen.
Press "OK" to confirm the settings and restart the RT9s.

3.6. fORCE RELaY StatES (If aVaILaBLE)

If the RT9s is equipped with relay outputs, you can use this screen to force their state,
ignoring the calendar data.
Each relay is associated with an operatingmode represented by a letter:
► "a": automatic mode, the corresponding
relay switches depending on the calen-
dar data.
► "1": forced mode, the corresponding relay
makes the contact and maintains it closed.
► "0": forced mode, the corresponding relay
releases the contact and maintains it open.
MDE-RT9s-3079V1.0 89