►
To use the RT9s, click "Execute Mozilla
Sunbird with the RtCP09/Rt9s".
2.5.1. automatic setup
►
The automatic setup software detects
the RT9s(s) present on the network.
►
Choose the RT9s you want to use. If the
RT9s does not appear on the list, check
whether its IP address is configured cor-
rectly (refer to the concerned sections in
this manual).
►
Click "Select" and wait until the setup is
complete.
►
If the selected RT9s has more than 4 re-
lays, a window will prompt you to select
the set of relays you wish to configure.
►
The software configures Mozilla Sun-
80
MDE-RT9s-3079V1.0