Safety Instructions For All Saws; Cutting Procedures - Dexter 20VCIS3-190BL.1 Manual De Instrucciones

2. SAFETY INSTRUCTIONS
explosion.
G. Follow all charging instructions and do not charge the battery
pack or tool outside the temperature range specified in the
instructions. Charging improperly or at temperatures outside the
specified range may damage the battery and increase the risk of fire.
SERVICE
A. Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
B. Never service damaged battery packs. Service of battery packs
should only be performed by the manufacturer or authorized service
providers.

SAFETY INSTRUCTIONS FOR ALL SAWS

CUTTING PROCEDURES

A. DANGER: Keep hands away from cutting area and the blade.
Keep your second hand on auxiliary handle, or motor housing.
If both hands are holding the saw, they cannot be cut by the blade.
B. Do not reach underneath the workpiece. The guard cannot protect
you from the blade below the workpiece.
C. Adjust the cutting depth to the thickness of the workpiece.
Less than a full tooth of the blade teeth should be visible below the
workpiece.
D. Never hold the workpiece in your hands or across your leg
while cutting. Secure the workpiece to a stable platform. It is
important to support the work properly to minimise body exposure,
blade binding, or loss of control.
E. Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting tool may contact
hidden wiring. Contact with a «live» wire will also make exposed
FR FR
ES ES
PT PT
IT IT
EL EL
PL PL
RU RU
UA KZ
KZ UA
RO RO
BR BR
EN
EN
369